Shower Hose Production Stage

Posted on 7 Şubat 2022 by zeynepbetull

Cevapla

Rubber washer is used to prevent water leakage.
The purpose of using the brass nut is so that it can be adjusted more tightly with the wrench.

CONCRETE

Posted on 22 Ocak 2022 by zeynepbetull

Cevapla

Thanks to its concrete structure, which consists of natural air bubbles and changes, it makes each flower pot unique.

General Features

(+) High compressive strength
(+) Heat resistant
(+) Easy to work
(-) May show permanent deformations over time under constant loads.
(-) May show some volume change in response to changes in the environment.

Why did they choose this material for this product?

Concrete flower pot because,
There is no need to have a drainage hole under it. Concrete material naturally adapts to the temperature of the environment. In other words, it provides insulation to the plant in the extreme heat that can be harmful for the plants in the summer months, keeping the roots cool and not rotting, and in the winter when the temperature drops, it feeds the soil by trapping the limited sun rays and heat, and ensures the plant to live and grow in a healthy way. Concrete flower pots are also suitable for indoor and outdoor use and are long-lasting.

Usage Areas

• Use in Commercial Buildings
• Roads or Driveways
• Use in Marine Construction
• Grilles and Sewers
• Fences

Concrete Handrail:This material was preferred due to weather conditions.

Concrete Floor Laying: It is used here because it is durable.

Manufacturing Techniques

Cement is only one of the components used in the production of concrete.

Other materials used while producing concrete are aggregate, namely sand or piece stones and water.

Similar Materials

Plaster

References

http://www.yapi-insaat.com/beton.html

https://www.betonichome.com/blog/icerik/neden-beton-saksi

Lighting Unit Production Process

Posted on 30 Aralık 2021 by zeynepbetull

Cevapla

GROUP

ELİF KARACA

ZEYNEP BETÜL SEVGİLİ

In our video, there is the production of a lighting product from start to finish and different product production stages.

Award Production Process

Görsel

Cevapla

Plastic > Thermoplastic > ABS (Acrylonitrile Butadiene Styrene)

Posted on 21 Kasım 2021 by zeynepbetull

Cevapla

Figure 1: STAM **peeler, assorted colours**

It is a product made of ABS material, created by injection molding method.

General Features;

(+) shockproof
(+) easy to mold
(+) easily colored
(+) chemical resistance
(+) surface quality
(-) Not suitable for use with food products
(-) it is harmful to the environment.

ABS

Acrylonitrile Butadiene Styrene (ABS) is an opaque thermoplastic polymer material obtained from Acrylonitrile, 1,3-Butadiene and Styrene monomers. Thanks to its strong and durable structure even at low temperatures, it has good resistance to heat and chemicals and is easy to process.

Usage areas of ABS;

bodies of electrical devices
kitchenware
toys
automotive interior and exterior parts
furniture, construction, electricity sectors

Injection Molding

The injection molding method is basically based on the molten die casting method.During production, granular plastic materials are melted and injected into high precision processed metal molds. The injection molding unit consists of two elements: the injection unit and the clamping unit. Injection molding is the most cost-effective way to mass-produce a plastic part. Thus, while thousands of plastic parts are produced with a single metal mold, each part is produced with the same quality.

General features;

(+) no need for a second operation
(+) mass production
(+) surface quality
(-) high cost
(-) high pressure

Usage areas;

automotive
medical
clothes
electronic
aviationIt is used in many industries such as rapid prototyping and the production of multi-part parts.

Since a sharp material is used, it is covered with a durable material, abs, in order to be safe. One of the most important reasons for this product is the use of injection molding method, since the material is not easily worn and is durable.

Safety is very important in this product, as the knife is a dangerous tool, so ABS, a durable material that is easy to hold, is used. Injection coating method is used for the same shape and mass production convenience for knıfe.